If you want low-cost LCD instead of costly digital TV or transform AV into VGA signal , FLY7503AV Converter is your best choice ,it can transform all AV or S-VIDEO signal into VGA signal with no losing, meanwhile can adjust lightness, contrast etc. parameter. FLY7503AV Converter supply Video Convert resolution with economy, high efficiency, ideal for you.

Capability and traits
-  1channel video input
-  1channel S-video input
-  1channel VGA signal input
-  1channel VGA signal output
-  DC-5V outside power supply
-  Supports signal: VIDEO, S-VIDEO,CVBS,VGA
-  Support system : PAL/NTSC
-  Output Resolution:800×600@60HZ,800×600@75HZ,1024×768@60HZ
-  Can adjust lighteness, contrast ，color saturation etc parameter.
-  Image freeze
-  Save current work estate when the power cut
-  Caption prompt in work estate
-  Remote control function

Connection introduction

Sketch map

Function of key-press

If you want low-cost LCD instead of costly digital TV or transform BNC into VGA signal ,FLY7503BNC Converter is your best choice ,it can transform all BNC or S-VIDEO signal into VGA signal with no losing, meanwhile can adjust lightness, contrast etc. parameter.
FLY7503BNC Converter supply Video Convert resolution with economy, high efficiency, ideal for you.

Capability and traits

• 1channel video input
  -  1channel S-video input
  -  1channel VGA signal input
  -  1channel VGA signal output
  -  DC-5V outside power supply
  -  Supports signal: VIDEO, S-VIDEO,CVBS,VGA
  -  Support system : PAL/NTSC
  -  Output Resolution:800×600@60HZ,800×600@75HZ,1024×768@60HZ
  -  Can adjust lighteness, contrast ，color saturation etc parameter.
  -  Image freeze
  -  Save current work estate when the power cut
  -  Caption prompt in work estate
  -  Remote control function

Connection introduction

Function of key press

Sketch map

If you want to display the movie that download from the network on the Home Theater. in other words. you want transform VGA into Video/sVideo signal. our LKV2000 WinMPG Video Convert is your best choice......
LKV2000 can triumphantly transform VGA into Video/Svideo signal.

Capability and traits
-  1 entries VGA Fan-in,1 entries VGA Fan-out
-  1 entries Video Fan-in,1 entries Sideo Fan-out
-  1pcs DC 5V port power supply
-  Output Resolution：640x480@60/72/75/85Hz,800x600@60/75Hz,1024x768@60/75Hz
-  output VGA\VIDEO\S-VIDEO signal at the same time
-  can display on LCD and TV in-phase
-  support system::NTSC( taiwan USA etc), NTSC-EIAJ(Japan), PAL(Europe、China),
    PAL-M(Brazil),PAL-N(Uruguay ,Paraguay) etc
-  support :OVERSCAN and UNDERSCAN  
-  light,thin short,small for easy to carry .
-  bulk :110mm)x56mmx36mm

Connector introduction

Sketch map

System requirments

Support PC and MAC
Plug & Play No software or driver requirement

Package and accessory

FAQ

1.1. No picture displayed.
  Check to see if the cables are correctly connected, and check to see if the output end and input end are reversed, also make sure power cable is connected well.
2.No AV displayed
  Check to see if the AV cable is in good condition and correctly connected. if ok, check to see if the Display terminal and TV set etc is switched to AV mode.
3.No S-video displayed.
  Check to see if the S-video cable is in good condition and correctly connected if ok, check to see if the video output equipment is switched to S-video mode.
4.Interference in display.
  This may be caused by insufficient power supply from USB part, try an external 5V power supply. it may also result from the close placement with machines which can produce magnetic field. move the converter away to see if the display is improved.

If you want to display the movie that download from the network on the Home Theater.in other words you want to transform VGA into Video/Svideo signal. our LKV 2000 PCI Video Converter is your best choice, LKV2000 can triumphantly transform VGA into Video/Svideo signal. ......
No software or driver requirement to Plug & Play 85Hz,800x600@60/70Hz.

Capability and traits

- 1 entries VGA Fan-in.1 entries VGA Fan-out
- Output Resolution：640x480@60/72/75/85Hz,800x600@60/70Hz,
  Show Mode:1024x768@60Hz
- Support: VIDEO，S-VIDEO fan-out
- Can display on LCD and TV in-phase
- Support all GC and operating system
- Output video format: NTSC or PAL
- support :OVERSCAN and UNDERSCAN

Connection introduction

Sketch map

System requirments

1. Support PC and MAC
2. Plug & Play No software or driver requirement

Package and accessory

FAQ
1.No picture displayed.
Check to see the cables are correctly connected.and check to see if the output end and input end are reversed.also make sure power cable is connected well.
2.No AV displayed.
Check to see if the AV cable is in good condition and correctly connected.and if ok.check to see if the video output set is switched to AV mode
3.No S-video displayed.
Check to see if the S-video cable is in good condition and correctly connected if ok.check to see if the video output set is switched to S-video mode